Plumber in Sugar Land, TX for Polybutylene Pipe Replacement and Whole-House Repipes in First Colony and Sugar Creek Homes
Primary Plumbing Services: Polybutylene Replacement
Updated November 2026
Primary Plumbing Services is a plumber in Sugar Land, TX, about 35 to 40 minutes southwest of our office near Ellington Field. Sugar Creek and the early sections of First Colony were built in the era when polybutylene supply pipe was common, so a lot of our Sugar Land calls start with a home inspection report.
Single-story repipes usually run $4,500-$13,000+, and two-story repipes usually run $7,000-$20,000+. Call 713-643-7228, 24/7.
- Pipe confirmed by its marking, not guessed by color.
- PEX or copper, priced side by side.
- Attic routing to keep new pipe out of the slab.
- Wall patching spelled out in the estimate.
- Family owned since 1986, BBB A+ accredited since 2001.
Check My Pipes
Fast callbackHomes: leaks, drains, water heaters, softeners, repipes and sewer lines.
Tell us what's happening and our office will call you back. Emergency? Call 713-643-7228, 24/7.
- Family Owned Since 1986
- Commercial and Residential
- 24/7 Emergency Plumbing
- Clear Estimates Before Work Starts
"They consistently go above and beyond in everything they do, from their top-notch customer support to the quality of their work."
Regina Trabanino , Google review
About Primary Plumbing Services
Ruben Munoz, PresidentPrimary Plumbing Services has been independently owned and operated by the Munoz family since 1986. The leadership team includes Ruben Munoz, President; Ruben Alex Munoz, Vice President of the Service Division; Melissa Gonzalez, Vice President of Business Development; and Andrew Gonzalez, Vice President of the New Construction Division.
Nearby service areas
Primary Plumbing Services Polybutylene Replacement
A replacement water heater with new copper supply lines.
Does My Sugar Land Home Have Polybutylene Pipe?
Identifying Polybutylene Pipe
It might, if it was built from the late 1970s to the mid 1990s and hasn't been repiped. Polybutylene is a flexible gray plastic supply pipe, usually marked PB2110, with crimp rings at the fittings. Color alone doesn't prove it, so we read the marking.

| Where to Look | What Polybutylene Looks Like |
|---|---|
| At the water heater | Gray flexible lines on top of the tank |
| Under sinks | Gray pipe coming out of the wall |
| Near the main shutoff | Gray pipe where water enters the house |
| In the attic | Gray lines running over the ceiling joists |
| At the fittings | Copper or aluminum crimp rings |
What If Part of the House Was Already Repiped?
That's common. A past owner may have replaced a few runs after a leak. We trace what's left and tell you whether the remaining polybutylene is a few lines or most of the house, which changes the price a lot.
Should I Repipe or Just Repair Polybutylene Leaks?
When Repiping Is the Better Choice
A single repair fixes one leak, not the pipe. Polybutylene can break down from the inside, so the next leak can show up anywhere, often at a fitting in the attic or behind a wall. Most owners who confirm polybutylene choose a whole-house repipe.

| Option | When It Makes Sense |
|---|---|
| Spot repair | An emergency, to stop a leak today |
| Partial repipe | Most of the polybutylene is already gone |
| Whole-house PEX repipe | Polybutylene confirmed in most of the house |
| Whole-house copper repipe | You prefer copper and accept the higher price |
Will It Affect My Homeowners Insurance?
It can. Some insurers ask about polybutylene. Call your agent before and after the work, and keep the permit, the final inspection and our invoice for your records and for a future sale.
How Does a Sugar Land Repipe Work?
How an Attic Repipe Works
In most Sugar Land slab homes, we run the new pipe through the attic and down inside the walls to each fixture, so nothing new goes in the slab. That means a few small, planned openings in the drywall, which get patched before we leave.

- Confirm the pipe and walk the house with you.
- Pull the permit through the City's online portal.
- Run new lines through the attic to every fixture.
- Connect each fixture and the water heater, with new shutoffs.
- Pressure test and inspect before walls are closed.
- Patch the drywall openings before we leave.
What Should a Repipe Quote Include?
Make sure the estimate includes: removal or abandonment of all the old supply pipe, the pipe brand and type, connections to every fixture and the water heater, a new main shutoff, the permit and inspection, and drywall patching. If patching isn't listed, ask, because some quotes leave it out.
What Do Sugar Land Permits and Codes Require?
Sugar Land Permit and Code Requirements
Sugar Land requires a permit to alter, repair or replace plumbing, and applications go through the City's online Citizen Self-Service portal. The City has adopted the 2024 International Codes, including the plumbing code, and contractors doing plumbing work must hold a Texas plumbing license.

| Sugar Land Requirement | What It Means for You |
|---|---|
| Permit for plumbing work | We pull it before the repipe starts |
| Citizen Self-Service portal | Applications and inspections online |
| 2024 International Codes | The current rules for new pipe |
| Licensed plumbing contractor | Required by Texas law |
| Garage water heaters raised 18 inches | Checked when we connect the heater |
How Much Does Repiping a Sugar Land Home Cost?
How Home Size and Fixtures Affect Cost
Repiping a Sugar Land home usually costs $4,500-$13,000+ for a single-story house and $7,000-$20,000+ for a two-story house. The number of bathrooms, the attic layout and whether you choose PEX or copper decide where your job lands. You get a clear estimate first.

| Sugar Land Plumbing (2026) | Typical Range |
|---|---|
| PEX repipe, single-story | $4,500-$13,000+ |
| PEX repipe, two-story | $7,000-$20,000+ |
| Slab leak detection | $200-$1,100+ |
| Slab leak reroute | $1,200-$5,500+ |
| Tank water heater, installed | $2,185-$3,500+ |
| Water softener | $800-$5,500+ |
| Service call | $130-$250+ |
See repipe services, leak detection and water heater replacement.
Is Sugar Land Water Hard on New Pipe?
The City reports hardness from about 2 to 12 grains per gallon, which can scale fixtures and water heaters. It doesn't harm PEX, but a softener can protect the heater and fixtures you connect to it. See water softeners.
Sugar Land Neighborhoods We Serve
Established and Newer Sugar Land Neighborhoods
Sugar Creek and early First Colony date to the 1970s and 1980s and are where we find polybutylene most. Greatwood and New Territory followed, while Telfair, Riverstone and Imperial are newer and call us more for water heaters and leaks.

| Area | What We See Most |
|---|---|
| Sugar Creek | Polybutylene, repipes |
| First Colony | Polybutylene in early sections, slab leaks |
| Greatwood and New Territory | Repipes, water heaters |
| Telfair, Riverstone and Imperial | Water heaters, leaks, softeners |
| Along US 59 and Highway 6 | Leak repair, fixture work |
Frequently Asked Questions About Plumbing in Sugar Land
Common Questions From Sugar Land Homeowners
How long does a repipe take?
Usually a few days, depending on the size of the house.
Can we live at home during the repipe?
Usually, yes. Water is off only for parts of each day.
Are the drain pipes polybutylene too?
No. Polybutylene was used for supply lines, not drains.
Should I buy a house with polybutylene?
Many people do. Get a repipe estimate before you close.
How fast can you get to Sugar Land?
Our office schedules service as quickly as possible, and the Primary Plumbing Services team travels southwest on US 59.
Do you work on Sugar Land businesses?
Yes. See commercial plumbing services.
Plumbing Near Sugar Land
Neighboring Communities We Serve
We cover Sugar Land from 11700 Playa Ct. See plumbers in Houston, TX or the cities we serve near Houston.

Reviewed by Ruben Munoz, President, Primary Plumbing Services
Call Primary Plumbing Services, Your Plumber in Sugar Land, TX
Schedule a Repipe Estimate in Sugar Land
Polybutylene out, PEX in. Call 713-643-7228.
Contact Us
We will get back to you as soon as possible.
Please try again later.
