Commercial Plumbing Installation in Houston, TX for Water Heaters, Restroom Fixtures and Backflow Preventers, Permitted and Filed
Primary Plumbing Services: Installed, Inspected and Filed
Updated November 2026
Primary Plumbing Services does commercial plumbing installation in Houston, TX for restaurants, retail, offices and apartments. We size the equipment, pull the permit, install it, pass the inspection and, for backflow, test and file the results with the City.
Commercial gas water heaters usually run $3,500-$9,000+ installed, and backflow preventers usually run $1,500-$4,500+. Call 713-643-7228.
- Water heaters sized to real demand.
- Permits pulled and inspections scheduled.
- Backflow tested and results filed after install.
- After-hours installs so you stay open.
- Family owned since 1986, BBB A+ accredited since 2001.
Request a Commercial Install
Fast callbackBusinesses: restaurants, high rises, retail, offices and multi-family.
Tell us what's happening and our office will call you back. Emergency? Call 713-643-7228, 24/7.
- Family Owned Since 1986
- Commercial and Residential
- 24/7 Emergency Plumbing
- Clear Estimates Before Work Starts
"with Primary, you can always be sure that they will be there in a flash to help you with your problems"
Brooks Bassler , Google review
About Primary Plumbing Services
Ruben Munoz, PresidentPrimary Plumbing Services has been independently owned and operated by the Munoz family since 1986. The leadership team includes Ruben Munoz, President; Ruben Alex Munoz, Vice President of the Service Division; Melissa Gonzalez, Vice President of Business Development; and Andrew Gonzalez, Vice President of the New Construction Division.
Related services
Primary Plumbing Services Installed, Inspected and Filed
A gas water heater with new flex gas connectors.
What Does a Commercial Water Heater Installation Cost in Houston?
How Capacity and Venting Affect Cost
A commercial water heater installation in Houston usually costs $3,500-$9,000+ for a standard gas unit and $8,000-$18,000+ for large-capacity or high-efficiency systems. Gas line size, venting, combustion air and recirculation add or subtract the most.

| Commercial Water Heater (Houston, 2026) | Typical Installed Range |
|---|---|
| Commercial electric tank | $3,000-$8,000+ |
| Commercial gas tank | $3,500-$9,000+ |
| Large-capacity or high-efficiency gas | $8,000-$18,000+ |
| Commercial tankless bank | $6,000-$15,000+ |
| Recirculation pump and loop | $800-$2,500+ |
Why Does My Restaurant Run Out of Hot Water?
Usually the heater is undersized for the dish machine and sinks running at once, the recovery rate is too low, or sediment has eaten the tank's capacity. We size by peak demand and recovery, not just gallons.
Commercial Restroom Fixture Installation
Fixtures Built for Heavy Use
Commercial restroom fixtures in Houston usually cost $700-$1,800+ per toilet, $600-$1,500+ per urinal and $500-$1,300+ per lavatory installed. ADA clearances, flushometer type and whether drains or supply lines move set the price.

| Fixture (Houston, 2026) | Typical Installed Range |
|---|---|
| Commercial toilet with flushometer | $700-$1,800+ |
| Urinal | $600-$1,500+ |
| Lavatory or sink | $500-$1,300+ |
| Commercial faucet | $200-$600+ |
| Hand sink, food service | $700-$1,400+ |
| Three-compartment sink | $1,200-$2,800+ |
| Mop sink | $900-$1,800+ |
Backflow Preventer Installation in Houston
Installation, Testing and City Filing
A backflow preventer installation in Houston isn't complete when the device is in. Under the City's Cross Connection Control Program, the assembly has to be tested right after installation by an approved licensed tester, and the passing results submitted to the City. It's then tested every year.

| Backflow Install (Houston, 2026) | Typical Range |
|---|---|
| Small commercial assembly | $1,500-$4,500+ |
| Large or fire line assembly | $3,500-$8,000+ |
| Initial test and filing | Required, listed in the quote |
- Right assembly for the hazard.
- Tested immediately after install.
- Results submitted to the City.
- Annual test after that. See backflow services.
Falling out of compliance can bring citations, daily fines and even water service suspension.
Do Commercial Plumbing Installations Need a Permit in Houston?
Permit Requirements for Commercial Installations
Most commercial plumbing installations in the City of Houston need a plumbing permit, and gas water heaters also need a gas permit and inspection. Permits must be pulled by a licensed Master Plumber registered with the City. Fees are modest; missing an inspection costs far more.

- Plumbing permit for fixtures and piping.
- Gas permit for gas water heaters and equipment.
- Inspection before the work is put in service.
- Outside city limits, the local city or county applies.
Frequently Asked Questions About Commercial Plumbing Installation
Common Questions From Owners and Managers
Can you install overnight so we don't close?
Yes, for most water heater swaps and fixture work.
Tank or tankless for a restaurant?
It depends on peak demand, gas supply and space. We size both and compare.
Who files the backflow test results?
We do, after the test.
Do you install grease traps too?
Yes. See grease trap services.
Do you do full tenant build-outs?
Yes. See tenant remodels.
Do you install residential water heaters?
Yes. See water heater installation.
Commercial Plumbing Installation Near You in Houston
Serving Houston From Our Office Near Ellington Field
Our installers work out of 11700 Playa Ct near Ellington Field. See our Houston, TX location.

Reviewed by Ruben Munoz, President, Primary Plumbing Services
Call Primary Plumbing Services for Commercial Plumbing Installation
Request Commercial Plumbing Installation
Sized, permitted, inspected and filed. Call 713-643-7228. Primary Plumbing Services has been a family owned commercial plumbers in Houston since 1986.
Contact Us
We will get back to you as soon as possible.
Please try again later.
